Dental Resin Soften/AR Heater Warmer/Light Cure/Ortho/Blue/Direct Composite kit

Description

Description:
Composite Resin AR Heater Warmer
AR Heater is designed to heat the composite resin material to improve the flow performance when it is bonded
AR Heater using precision circuitry to control its heating module.Keep the temperature tolerance within ±1
℃
.Depending on the material and personal
choose,the temperature can be set to:40
℃
，
50
℃
and 70
℃
.
Technical :
Power :
Input: 100-240V AC 50/60Hz 0.8A Max
Output:
15V DC 2A
Underfined:
Power: 24W
Temperature setting: : 40±1
℃
, 50±1
℃
, 70±1
℃
Package Size: 20*15*9cm
Package Gross Weight: 1.035kgs
Resin Heater Material Soften
Product Description
Resin heater is designed for heating composite resin material to improve the flow of its adhesive properties.
At the same time it can also be used to heat adhesive when used manual equipment, filter cover.
1-
Light filter;
2-
Heating plate;
3-
Heating main body;
4-
Resin base;
5-
Temperature indicator;
6-
Temperature selection and the on / off button;
7-
DC power.
Operation
1.
DC Plug the power adapter into the external socket to connect the power;
2.
Green light is shining after the power supply the default temperature of 40
℃
;
3.
One key operation, three temperature precise adjustable:
4.
When the green light is standing, the temperature is 40
℃
;
5.
Once again the key shows the yellow light shining, and the representative continues to heat until the
yellow light is often bright and the temperature is
45
℃
;
6.
Once again the key shows the red light shining, and the representative
continues to heat until the red light is often bright and the temperature is 50
℃
Temperature
Light color
Heating
Reached the preset temperature
40
℃
Green
Shiny Green LED
Green LED often bright
45
℃
Yellow
Shiny Yellow LED
Yellow LED often bright
50
℃
Red
Shiny Red LED
Red LED often bright
Notice:
Quick flash means heating up, when the temperature reaches 50
℃
, then press the key it can be cooled to 40
℃
;
The light slowly flashes when cooling down.
Cleaning and disinfection
All the parts can be disinfectant cloth to wipe clean. Don't take any part in any liquid immersion disinfection.
Not 135
℃
sterilization.
Technical parameters
power
Input : 100-240V AC 50/60Hz
Output : 12V
3A
Light Cure Composite kit
INDICATIONS FOR USE:
Direct restoration for all class caries.
Restoration of teeth defect and veneer.
Package:
REFILL:
Light Cure Composite: 4g/Syringe*5
Syringe Needles : 5pcs/ box*1
Total Etching Adhesive: 5ml/Bottle*1
Etching Gel: 2.5ml/Syringe*1
Applicators Brushes: 20pcs/box*1
Net weight:
188.4g
COLOR:
A1,A2,A3,A3.5,B1
FEATURES & ADVANTAGES:
Unique dispersion technology ensure the filler evenly distributed
Radioopaque and fluoride releasing Optimal polishability and high shade stability.
Excellent handling, not sticky to instrument;
Suitable for most cases of restoration, extensive indication of usage.
INSTRUCTIONS
：
(1)Preparation: isolate and prepare tooth.
(2)Cleaning: rinse the preparation with water.
(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.
(4)Applying Dentex Self-Etching Light Cure Adhesive (DSA):
dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).
(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.
(6)Applying Dentex light cure composite (DLC): place selected DLC into
cavity preparation following by light cure. According to following
table, the curing time is recommended for different depth and color
shades. In order to reduce shrinkage stress, for a large cavity, an
increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.
(7)
Finishing: after light cure, adjust restoration.
(8)
Polishing: use polishing strip or disc to polish the surface
WARNING:
Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol.
PRECAUTIONS:
Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water. In severe situation, get medical attention.
ATTENTION:
To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product.
STORAGE:
Store at 25
℃
or less in a cool and dry place and avoid direct sun exposure.
Recap the syringe after use.
DISPOSAL:
After the product is used up, dispose it as normal medical rubbish.
SHELF LIFE:
3 years
Orthodontic Adhesive Kit (Total-Etching type)
Description
Orthodontic Adhesive: Designed for bonding of metal and ceramic brackets on enamel.
It is of high viscosity and thus prevents bracket drifting and reduces material waste.
As it is light cured extra working time is ensured and therefore accurate bracket placement can be obtained.
INDICATIONS FOR USE: Direct bonding of metal and ceramic brackets
Packing list:
Orthobond Light Cure Adhesive Primer
6ml*1 bottle;
Etching Gel
5ml*1 syringe;
Light Cure Adhesive Paste 4g*3 syringe;
Little brush 20;
Syringe tip:5
STORAGE: Store at 25
℃
or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use.
Orthodontic
Adhesive Light Cure
Blue Glue
Kit
Feature:
This orthodontic adhesive provides a longer working time and a rapid setting time. Can be placed directly into bands. Excess flash is easy to clean up prior to the light curing and the cement is easy to see due to the blue color.
It contains fluoride to reduce the chance of declacification.
Packing list:
1 x
Etchant acid Gel 2.5ml
syringe;
1 x
Light Cure Adhesive Paste 5g
syringe;
1 x
Syringe tip
Box size: 17*11*2.5cm
STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use.
No-mix Orthodontic
Direct Bonding system
Specifications
1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material.
2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength.
3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories.
Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.
Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process;
Brushing: apply a thin layer of the primer over the etched enamel with the brusher;
Packaging Detail:
1 x bottle
（
3ml
）
Primer
1 x Syringes (3.5g each)Paste
1x Syringes (2.5ml)etchant Gel
7x Brushes
1x
Syringe tip
STORAGE: Store at 25
℃
or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use.
FDA Statement:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. So you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation,We have to verify your status as an authorized purchaser of this item before shipping of the item. Thanks for your understanding!
Seller's Name :
freshdent
Telephone Number : 0755-65430522
City : Shenzhen
State : China
Payment
We only accept paypal payment,it is easy and safe. and for any other payment forms,please kindly contact us in advance.
Shipping
The goods you ordered will be posted out in the second working day after the payment has been made. (We will inform you via email if any delay occurred due to holiday events.
General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal)
About Us
If you have any query or dissatisfaction, please
find
our customer service via eBay Message Center only.
If you
send message
via eBay message, we'll reply you within 24 working hours.
Thank you so much for your purchase. Wish you have a nice day! : -)