Fusor 123EZ 2-Part Medium Non-Sag Seam Sealer, 7.1 oz Cartridge, Paste, Blue

Description

Fusor 123EZ 2-Part Medium Non-Sag Seam Sealer, 7.1 oz Cartridge, Paste, Blue, 24 hr Curing
Fusor 123EZ sealer is a two-component, epoxy-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan, and core support seams.
Fusor 123EZ sealer is used in applications which require a non-sag cosmetic seam sealer with reduced cycle time. Sealer can be applied directly to bare metal or primed surfaces.
Fusor 123EZ = 7.1 oz (210 mL)
Shelf life is 24 months from date of manufacture when stored at 75°F (24°C) in original, unopened container.
Substrates: Bare Metal or Primed Surfaces
OEM Approvals & Recommendations: GM, Ford, Honda/Acura
Features
High Performance – provides excellent adhesion to bare or primed surfaces.
Versatile – bonds bare metal, epoxy or urethane two-component primed surfaces; weld through with minimal burn back.
Excellent Appearance – easily duplicates factory appearance; provides flexible seal with no shrinkage, cracking or sagging.
Environmentally Resistant – provides excellent corrosion protection.
Easy to Finish - can be tooled or wiped clean immediately, or sanded/painted in 30 minutes.
Applications - Duplicating factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where medium work time is desired.
Specifications
Part No.: 90974
Product Line: FUS
Standard/Approvals: GHS Hazard
Applications: For truck beds, tooled door skin, floor pan
Manufacturer: LORD Fusor Adhesives
Alternate Part Number-1: 90974
UPC: 666233909741
Brand: Fusor
Applicable Materials: 2K Primer, Epoxy 2K Chemistry
Composition: 55 to 60% Epoxy Resin, 15 to 20% Alkyl Phenol Blocked Polyisocyanate, 10 to 15% Epoxy Resin, 5 to 10% Epoxy Resin, 1 to 5% Alkyl (C12-14)Glycidyl Ether, 1 to 5% Amide, 0.1 to 0.9% 4-Nonyl Phenol, 0.1 to 0.9% Epoxy Resin (Part A), 1 to 5% Amine Compound, 1 to 5% Amide (Part B)
Application Time: 10 to 15 min at 70 deg F/5 to 10 min at 90 deg F
Paintable (Y/N): Y
Sprayable (Y/N): N
Component: 2K
Color: Blue
Flash Point: 201 deg F
Container Size (oz)    7.1
Container Type: Cartridge
Form: Paste
Type: 2-Part, Medium
Curing Time: 24 hr at 70 deg F